CAR PRO X Fire Blanket (Reusable)
ID:Car Pro X-
Bridgehill Car Pro X
(Professional)Product information
Size/Weight: ±6 x 8 m (48㎡) ±28 ㎏
Core material: 340 g/㎡ graphite
Coating: 160 g/㎡ silicone polymer (flames may occur during first time use)
*In fires with high levels of conduction heat, flames may appear from the coating of the fire blanket. This will not alter the performance of the fire blanket.
Edge of blanket:Eyelets every meter for when using the fire blanket as a fire sail.
Car sizes: Handles normal size vehicles up to SUVs such as Land Rovers, XC90 etc.
Main usage: ◇ As fire blanket ◇ As fire sail– Put vertically on the object to stop the spread of fire
Smartbag: Airtight bag. Smartbag care and maintenance: use silicon grease on the zipper to keep the bag airtight
Technical specification
Core Fabric Unit Tolerance Yarn Warp
Weft396
396TEX
TEX±5
±5Yarn count Warp
Weft4.5
4.0Ends/cm
Ends/cm±5
±5Tensile strength (typical) Warp
Weft3000
3600N/50mm
N/50mm≧
≧Area weight – 340 G/㎡ ±10% Thickness – 0.32 Mm ±5% Weave pattern – 4H satin Service temperature on core fabric Short term ±2500℃
Long term ±1500℃Obtained NFPA 701 Certification
Tested at RISE Fire Research
How to use
Step 1:Place the fire blanket on the ground. Center it in front of or behind the car and roll it out.
Step 2:Two people should grab each their handle and safely pull the fire blanket over the car in one continuous movement.
Step 3:Make sure the fire blanket is tight all the way to the ground and leave the fire blanket. Wait for firefighters to assess the situation further.
ALWAYS CALL THE FIRE DEPARTMENT!
Always fold the fire blanket to create two layers when using it on open lithium batteries. For proactive use on a burning building, staple the fire blanket to a wooden wall, as the last wall to fall.
-
Bridgehill Car Fire Blanket Pro X
Bridgehill Car Fire Blanket - how to use short version
-